Click to Start Test
Grant microphone access to begin testing
Microphone Test Online: check if your mic works
This free microphone test shows straight away whether your mic picks up sound. Press Start Microphone Test, allow access and speak: the volume meter, the waveform and the frequency spectrum react to your voice in real time. Then record a short clip and play it back to hear yourself the way your browser captures you.
It works with built-in laptop microphones, USB microphones, headsets and webcam microphones, on computers and on phones. Use it before an online meeting, a stream or a recording, when people tell you they cannot hear you, or when you set up a new headset and want to find out which of several microphones is which.
The test runs entirely in your browser with the Web Audio API. The sound is analysed on your device, the test recording stays in the memory of this tab and nothing is uploaded. There is no download and no account.
What the mic test shows
- Volume level. A live meter from 0 to 100 %. The number turns yellow above 50 % and red above 80 %, so a level that is too hot is easy to spot.
- Waveform. The shape of the sound as it arrives. A flat line while you speak means no signal is getting through.
- Frequency spectrum. 64 bars from low tones on the left to high tones on the right. Background noise that gets through shows as bars that stay up while you are quiet.
- Test recording. Record a clip, stop it, play it back and delete it. A timer counts the seconds while you record.
- Device choice. Pick any connected microphone. Switching the device while the test runs restarts it with the new microphone.
- Diagnostics. The sample rate and base latency of the browser's audio pipeline, the number of channels and the name of the microphone in use.
- Clear error messages. The test tells you whether access was denied, no microphone was found, the microphone is in use by another app or the chosen device is no longer available.
How to test your microphone
-
Choose your microphone
Leave Default Microphone selected or pick a device from the Microphone Device menu. The device names appear in the list once you have allowed access.
-
Press Start Microphone Test
The microphone stays off until you press the green button.
-
Allow microphone access
Choose Allow when your browser asks. The permission covers this site only, and you can take it back in the browser settings at any time.
-
Speak and watch the meter
Talk at your normal volume. The volume meter, the waveform and the spectrum should move with your voice. If they stay flat, the microphone is muted or the wrong device is selected.
-
Record and play back a clip
Press Record, say a sentence, press Stop and play the clip. Listen for noise, echo, distortion or a level that is too quiet.
-
Stop the test
Press Stop Test when you are done. The microphone is released and other apps can use it again.
Good to know
- Microphone Active only means that the browser opened the microphone. A muted headset or a hardware mute switch still lets the test start, so make sure the meter moves before you rely on it.
- The test switches on echo cancellation, noise suppression and automatic gain control in the browser. Steady background noise can be reduced and quiet speech raised automatically, so the clip may sound cleaner than the raw microphone signal.
- If the value keeps jumping into the red above 80 %, move the microphone a little further away or lower its input level in the sound settings of your system.
- If the test reports that the microphone is in use, close other apps that may hold it, such as a call or a recording app, and try again.
- Pages opened inside apps such as Facebook, Messenger or Instagram often cannot use the microphone. Open the page in Chrome or Safari instead.
Frequently asked questions
How do I test my microphone online?
Press Start Microphone Test on this page and choose Allow when your browser asks for microphone access. Speak, and the volume meter, waveform and frequency spectrum respond right away. To hear yourself, record a short clip and play it back.
Why is my microphone not working?
Read the message the test shows. Access denied means the browser or the operating system blocks the microphone, so allow it in the site settings and in the privacy settings of your system. No microphone found means none is connected or enabled. In use means another app holds it. If the test starts but the meter stays flat, the microphone is muted or the wrong device is selected.
How do I allow microphone access in my browser?
Click the icon to the left of the address bar, find Microphone, set it to Allow and reload the page. On a phone, also check in the system settings that the browser app itself may use the microphone.
Is my audio recorded or uploaded?
No audio leaves your device. The sound is analysed in your browser, and a test clip exists only when you press Record. It stays in the memory of this tab until you delete it, reload the page or close the tab.
Does the microphone test work on phones?
Yes, in mobile browsers that allow microphone access, such as Chrome on Android and Safari on iPhone and iPad. If the page was opened inside an app such as Facebook, Messenger or Instagram, open it in the browser instead, because in-app browsers often block the microphone.
Why does my recording sound different from my real voice?
The test asks the browser for echo cancellation, noise suppression and automatic gain control, so steady noise can be reduced and the level adjusted. Most people also find their recorded voice unfamiliar, because they normally hear it partly through the bones of their own head.
What do the sample rate and latency values mean?
Sample rate is how many times per second the audio pipeline of the browser measures the sound, usually 44,100 or 48,000 times. Latency is the estimate of the delay the browser adds while processing audio. Both describe the browser setup, not the quality of the microphone itself.
Can I choose which microphone to test?
Yes. Use the Microphone Device menu above the test. The names of your devices appear after you allow access the first time, and choosing another device while the test runs restarts it with that microphone.
How do I test my mic before a Zoom, Teams or Google Meet call?
Run this test, check that the meter moves when you speak and record a short clip to hear how you sound. Then press Stop Test so the meeting app can take the microphone, and make sure the same device is selected in the audio settings of that app.
Is the microphone test free?
Yes. It is free and needs no account, no download and no browser extension.