Untitled Click a shape to select. Drag it to move on the ground, hold Shift to lift. 0

Free online 3D model maker

simple3D lets you build 3D models in your browser from ready-made shapes. You drop in boxes, spheres, cylinders, cones, pyramids, a torus, a flat plane or a wedge, then move, rotate, resize and colour them until they form the object you want. The finished model downloads as STL for a 3D printer, as OBJ for other 3D programs, or as glTF for the web and game engines.

It suits first steps in 3D and quick, simple objects: a box with a lid on top, a stand, a toy figure, a mock-up of a room or a part to print. No modelling knowledge is needed and you do not write any code. There is nothing to install and no account, your models are saved automatically in this browser, and nothing is uploaded to a server.

simple3D works with whole shapes only. It cannot cut one shape out of another, round edges or edit single faces. For holes, cut-outs and parametric parts, describe the model in OpenSCAD code and convert it with the OpenSCAD to STL tool.

What simple3D can do

  • Eight shapes: box, sphere, cylinder, cone, pyramid, torus, plane and wedge. A new shape lands standing on the ground, in the next colour of the palette.
  • Move by dragging: drag a shape to slide it along the ground, hold Shift to lift it up or down. Grid snapping rounds the position to the grid step.
  • Exact values: the Properties panel sets position, rotation in degrees, size (width, height, depth or radius, depending on the shape) and colour.
  • Object list: every shape in the scene, with rename and show or hide.
  • Camera: orbit, pan and zoom, frame the whole model, or jump to the front, top or isometric view.
  • Real units: millimetres, centimetres, metres or inches. Switching the unit converts the whole model, so its real size stays the same.
  • Undo and redo of up to 60 steps, and duplicate with Ctrl+D.
  • Six starter templates: blank scene, snowman, little house, table, robot and rocket.
  • English and Czech interface, switched in the top bar.

How to make a 3D model

  1. Start a model

    On your first visit the Models window opens by itself, and later you find it under Models in the toolbar. Press New blank model, or click a template such as the little house or the table to start from a finished example.

  2. Add shapes

    Press Add in the toolbar and pick a shape. It appears standing on the ground grid, and the status bar shows how many triangles the model has.

  3. Place each shape

    Drag a shape to move it on the ground and hold Shift while dragging to lift it. Drag the empty space to orbit the camera, and use the wheel to zoom.

  4. Set exact sizes and colours

    Select a shape and type its position, rotation and size in the Properties panel, then pick a colour. Duplicate a finished part with Ctrl+D instead of building it again.

  5. Export the model

    Open Export and choose STL for a 3D printer, OBJ for other 3D software or glTF for the web, or Save model to keep an editable .json copy.

Export formats

  • STL: binary STL with Z pointing up, the convention of 3D printing and CAD. STL has no colours.
  • OBJ: text OBJ, also Z-up, with one named object per shape and vertex normals. No materials or colours are written.
  • glTF 2.0: a single .gltf file with the data embedded, Y-up as glTF requires, one node per shape with its colour.
  • Model (.json): the complete scene with all settings. Load it again with Open .json in the Models window, in any browser.

Hidden shapes are left out of the STL, OBJ and glTF exports. Shapes are not merged into one solid: each one is written as its own mesh in the same file.

Good to know

  • Units in STL: an STL file stores plain numbers without a unit. simple3D writes them in the model's unit, so for 3D printing model in millimetres, the unit slicers usually assume.
  • Keyboard: F frames the whole model, Delete removes the selected shape, Ctrl+D duplicates it, Esc clears the selection, Ctrl+Z and Ctrl+Y undo and redo.
  • Moving the view: drag to orbit, right-drag or two fingers to pan, and the wheel or a pinch to zoom.
  • Keep a backup: models live in this browser's storage. Clearing the site data removes them, and they do not move to another browser or device by themselves. Save model (.json) gives you a copy to keep.

Frequently asked questions

Is simple3D free?

Yes. simple3D is free to use, with no account, no sign-up and nothing to install. It runs in your web browser.

Are my models uploaded to a server?

No. simple3D has no server side. Models are saved in this browser's local storage, and exported files are created in the browser and downloaded straight to your device.

Can I 3D print a model from simple3D?

Yes. Export STL and open it in your slicer. The STL is Z-up, so the model stands the right way up. Build in millimetres, because STL numbers carry no unit and slicers usually read them as millimetres.

Which file formats can I export?

STL for 3D printing, OBJ for 3D programs, glTF 2.0 for the web and game engines, and the simple3D model file (.json) that keeps everything editable.

Can I import an STL or OBJ file?

No. simple3D opens only its own .json model files, with Open .json in the Models window. STL, OBJ and glTF are export formats only.

Can I cut a hole into a shape?

No. simple3D has no boolean operations, so shapes can only be placed next to or into each other. For holes and cut-outs, write the part in OpenSCAD and turn it into an STL with the OpenSCAD to STL tool.

Where are my models saved?

In the local storage of the browser you use. They are saved automatically shortly after every change. Another browser or device does not see them, and clearing the browser's site data deletes them, so use Save model (.json) to keep a copy.

Does simple3D work on a phone or tablet?

It supports touch, with orbit, two-finger pan and pinch zoom, but it is built for a larger screen. On a phone a notice first suggests a computer, and Open anyway takes you to the editor.